Paul Deffenbaugh

Info

The UTEP W.M. Keck Center
The UTEP EM Lab
UTEP Scholars
Google Scholar
Zoom Info

Dissertation

Paul Deffenbaugh, "3D Printed Electromagnetic Transmission and Electronic Structures Fabricated on a Single Platform using Advanced Process Integration Techniques," Ph.D. dissertation, Elect. & Comput. Eng., UTEP, El Paso, TX, 2014.
Full Access
At UTEP

Publications

Paul I. Deffenbaugh, Thomas M. Weller, Kenneth H. Church, Fabrication and Microwave Characterization of 3D Printed Transmission Lines, submitted for publication.
Full Access Paper

Paul I. Deffenbaugh, Josh Goldfarb, Xudong Chen, Kenneth H. Church, Fully 3D Printed 2.4 GHz Bluetooth/Wi-Fi Antenna, IMAPS, 46th International Symposium on Microelectronics, Orlando, Florida, September 30 October 3, 2013.
Full Access Paper

Paul I. Deffenbaugh, Raymond C. Rumpf, Kenneth H. Church, Broadband Microwave Frequency Characterization of 3-D Printed Materials, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.3, no.12, pp.2147-2155, Dec. 2013.
Full Access Paper

Kenneth H, Church, Harvey Tsang, Ricardo Rodriguez, Paul I. Deffenbaugh, Raymond C. Rumpf, "Printed Circuit Structures, the Evolution of Printed Circuit Boards", ICP APEX EXPO Conference.
Full Access Paper

3D Printed Impedance Elements by Micro-Dispensing
Ubaldo Robles, Paul Deffenbaugh, Harvey Tsang, Raymond Rumpf, "3D Printed Impedance Elements by Micro-Dispensing"
Available: http://digitalcommons.utep.edu/elec_comp_papers/72/
Abstract, 2013
Abstract, 2012
Full Access Poster
Full Access Thesis

Conference Presentations

A Printed-Electronics Flying Camera
IMAPS Florida Chapters Microelectronics, Manufacturing, Materials and Application Symposium & Exhibition, Orlando, Florida, February 24, 2011
Full Access Abstract
Full Access Presentation

Microwaves in 3D Printed Electronics
IMAPS Advanced Technology Workshop on 3D and Conformable Printed Electronic Packaging Materials, Manufacturing & Applications, El Paso, TX, February 22-23, 2012
Full Access Abstract
Full Access Poster
Full Access Presentation

Fully 3D Printed 2.4 GHz Bluetooth/Wi-Fi Antenna
IMAPS 2013 - Orlando, 46th International Symposium on Microelectronics, Orlando, Florida, October 1, 2013
Abstract
Full Access Abstract
Full Access Presentation
Full Access Paper

Automated 3D Printed Electronics
IMAPS Microelectronics Chapter Meeting, Orlando, Florida, May 14, 2014
Full Access Presentation

Posters

Microwaves in 3D Printed Electronics
IMAPS Advanced Technology Workshop on 3D and Conformable Printed Electronic Packaging Materials, Manufacturing & Applications, El Paso, TX, February 22-23, 2012
Full Access Poster

Waveguide Measurement of Materials
UTEP EM Lab, El Paso, TX, November 5, 2012
Full Access Poster

Presentations

Materials Measurement, Permittivity and Loss Tangent
Information session for USF WAMI group, Tampa, FL, November 18, 2013
Full Access Poster

Professors and Colleagues

Dr. Kenneth H. Church in the W.M. Keck Center

Dr. Raymond C. Rumpf at UTEP in the EM Lab and on Google

Dr. Thomas M. Weller at USF in WAMI Lab and on Google

Access

ftp://utminers.utep.edu/
Username: miners\pdeffenbaugh
Password: standard



© 2014 Paul